Fuel problem 4035

[Harry in Ky]

If it were my project I would be contacting a pump shop with some numbers off the I.D. tag and see what they have to say. At this point it looks like a pump rebuild is in your not too distant future.

 

[mopedal]

I’m still struggling to gain any ground on getting my 4035 running. I went ahead and pulled out the shut off again and this time took a picture over yet along with the picture of the hole it screws into.(I was trying to see if rubber plunger would show up in the picture, but I didn’t see one).
I also make sure the pump was getting adequate fuel(see video).
Does anybody see anything that doesn’t look right or, does anybody have any suggestions on what to look for next?

If it were my project I would be contacting a pump shop with some numbers off the I.D. tag and see what they have to say. At this point it looks like a pump rebuild is in your not too distant future.

Thats a shame. this tractor has only got a little over 600 hours on it.

 

[Harry in Ky]

Assuming it's Bosch VE pump of some sort, my experience has been that hours on the clock don't mean much. Those pumps do NOT like water or air in the fuel. If you've had any history of either (or maybe both) they can get expensive quickly.