Gannon Box Scraper Hydraulic cylinder

[chilbun28]

Hi, I just bought a Gannon grader box scraper and my hydraulic cylinder is missing for the scarifier ripper bar. Part # 13534-1 is the number I had written down from a previous Gannon grader cylinder I had several years ago. I had a hydraulic shop rebuild my last Gannon cylinder that had issues and it worked fine after that, but on this box blade its completely missing. Yall helped me out on here with my last one, I'm hoping someone on here knows the cylinder specs and has one for sale. My location is Baton Rouge, Louisiana. Thank you all and Happy New Year!

 

[D&D]

Hi, I just bought a Gannon grader box scraper and my hydraulic cylinder is missing for the scarifier ripper bar. Part # 13534-1 is the number I had written down from a previous Gannon grader cylinder I had several years ago. I had a hydraulic shop rebuild my last Gannon cylinder that had issues and it worked fine after that, but on this box blade its completely missing. Yall helped me out on here with my last one, I'm hoping someone on here knows the cylinder specs and has one for sale. My location is Baton Rouge, Louisiana. Thank you all and Happy New Year!

Look on page 24 for the specs. I’d try my local guy again and see what they can come up with.

https://www.wainroy.com/content/dam/brands/wainroy/documents/operators-manuals/WainRoy_Woods_BoxScrapers_MAN0856.pdf

Here’s one for ~$500

https://lindstromequipment.com/hydraulic-cylinder-garriso-13534-1/?srsltid=AfmBOorsCxfL4uf8PEFIYpfMcy8g_lUG8n6L_ooBfM_5vS3Iymt175ct

 

[chilbun28]

Thank you very much!

 

[TractorTech]

You can take a top or side link 3" diameter cylinder with a 4" stroke and modify the ends to fit, like this one: UA993202 3.
Not real difficult to do with the diagram shown in the Woods/Gannon scraper book provided by @D&D.

Gannon used the same basic barrel and rod to make the top, tilt and ripper cylinders.