Gas pedal *extremely* stiff

[Wagtail]

Does the Kubota FWD/REV treadle have a grease nipple on the underside?

My 4105 has two of them and they were not shown in my Owner Manual.

 

[Gem99ultra]

My L3400 DOES have 2 zerks on the forward/reverse pedal. They were very hard to find the first time but after about a year of use, I did stumble upon them. My only suggestion is to get a good flashlight and look closely again.

But don't feel bad - I had a heck of a time finding the well hidden hydraulic fluid sight glass. And even now I have to use a flashlight to read it. After the first time of wasting half an hour searching for it, I stuck a label next to it. Yeah, getting old is not fun...

 

[Egon]

Make sure all the parts are in the proper alignment.

If there is v plate with roller the problem may be in this area.

 

[BubbaJr]

I had the same problem with my old B2910 a few years ago. I took it to the dealer and he found that the bearing or bushing on one end of the pivot shaft was totally disintegrated and bound up. He had to do some welding and machine work, and then it worked fine.

It was so bad that some times I had to stand up and put all my weight on the reverse pedal to change direction.