Gasket for Simms Injection Pump

[Paystar]

You were right Tinhack...no longer available. I had Don at Smith's Farm Equipment, a New Holland dealer, try his best.
Luckily mine is not damaged, I just have to play around and re-adjust a few times to get it where it doesn't leave a drip down the side of the block overnight.

But he did mention the same thing you did.....the kit to make your own and glue together.
He isn't a fan of RTV gasket maker in applications that involve fuel.

I'll have to check if Anglo Agri-Parts in the UK where I just had my fuel filters sent from can get any.

 

[thepumpguysc]

Any fuel shop will have a 3 cyl SIMMS side cover gasket.!!

 

[Paystar]

Any fuel shop will have a 3 cyl SIMMS side cover gasket.!!

I don't have any fuel pump shops around me, But if I ever need pump work, I will be sure to contact you pumpguy

I did ask Anglo in the UK also, and they don't have them either.

Luckily mines not trashed.....I just have to fiddle with it a few times to get it to stop leaving a drip overnight.

 

[thepumpguysc]

R u in the US.??
If so, I have one..

 

[Williy]

Paystar have you tried this website??

Pumps type Simms/Minimec | STAR Diesel

...

www.stardiesel.com

willy

 

[Paystar]

R u in the US.??
If so, I have one..

No, I'm in Canada. But if I end up needing one I'll let you know. I can buy and pay shipping.

 

[Paystar]

Paystar have you tried this website??

Pumps type Simms/Minimec | STAR Diesel

...

www.stardiesel.com

willy

No, but I'll have a look. Thanks to you and thepumpguysc!

 

[thepumpguysc]

How about I give u the part number and u can search it.?
Part number is:
Simms 500232 good luck
They go by number of cylinders.. I’m assuming you need a 3 cylinder side cover gasket.??

 

[ROUSTABOUT]

I don't have any fuel pump shops around me, But if I ever need pump work, I will be sure to contact you pumpguy

I did ask Anglo in the UK also, and they don't have them either.

Luckily mines not trashed.....I just have to fiddle with it a few times to get it to stop leaving a drip overnight.

Mail.

 

[thepumpguysc]

What I find strange is, u get a drip over night..
The oil level should not b that high.. it’s simply “splash oil” up there..
If all else fails, take the gasket/oring out of the groove and turn it over, that should give u a clean sealing surface to tighten the cover to..
BTW.. there are several fuel shops in Canada.. & as long as you have the p#, u should have no problem tracking 1 down.. at least a fuel shop doesn’t have an excuse.. lol