GC1700 Series - Tractor w/FEL only Measurement Request ...

[User Name]

Can someone please take a measurement off there existing GC1700 serires tractor and FEL?

Tractor Data .com lists the 1705 & 1715 as 97.6 inches in length. The 1710 & 1720 listed at 177 inches. The difference being the BH between the two types would then be 79.4 inches. No way!

All the MF info I can find has same measurements. (I'm thinking tractors are 97.6" w/o FEL and the 177" is with both BH & FEL.)

All I want is the TOTAL length of tractor with FEL (no BH) measurement. Within an inch would be great. Can someone please give me that .... PLEASE?

 

[MoMower]

Hopefully someone will get it before but Sunday I’ll grab it if no one does

 

[WranglerX]

From mid point (vertically) of bucket (sitting flat on ground) to ball ends of 3PH my 1715 with the DL95 loader measures 119 inches... Its a give or take about 6-8 inches depending on how bucket is positioned though....

Dale

 

[User Name]

From mid point (vertically) of bucket (sitting flat on ground) to ball ends of 3PH my 1715 with the DL95 loader measures 119 inches... Its a give or take about 6-8 inches depending on how bucket is positioned though....

Dale

Thanks to those that checked in. I actually drove by one today and checked in with the owner (who by the way LOVES his 1710).

Back of tracor to front of FEL is 10'-2" (sava bit more by turning bucket vertical.