Mowing GC17xx SSQA for DL95

   / GC17xx SSQA for DL95 #11  
ssqa adaptor.jpgI have a pin on bucket now, and I am thing of buying the ssqa for the loader and converting the bucket I found the pictured bracket but not a 100% sure it will work does anyone have any insight into this. they say it is 45" wide by 18 tall.
 
   / GC17xx SSQA for DL95
  • Thread Starter
#12  
View attachment 625102I have a pin on bucket now, and I am thing of buying the ssqa for the loader and converting the bucket I found the pictured bracket but not a 100% sure it will work does anyone have any insight into this. they say it is 45" wide by 18 tall.
Universal quick attack/skid steer quick attack is a universal standard to you're fine there. If that's only 45" wide you'll be fine as it'll fit inside the outer edges of your factory pin on bucket. Just cut off the factory ears flush with the bucket so you get a nice flat surface to weld to. I can provide pictures with measurements if you need to know how high to mount the plate. It will stick up over the bucket back.IMG_20190901_145726.jpg
 
   / GC17xx SSQA for DL95 #13  
First I need to get the right ssqa for the GC FEL, the one from MF I found uses the pins to attach and I would rather have the lever on each side like you have on your DL95 it would give more attachment options then the one from Massey/AGCO or at least the one I seen.

I am going to the dealer tomorrow where I bought my 1705 and I will find out what he can do for a price, he has tried to get ahold of me a few times to see how I like my scut but I would rather talk right to him plus I want to see about a valve for the front end for a grapple set up and see what he has on his lot heeheehee.
 
   / GC17xx SSQA for DL95 #14  
This is the one I致e seen.
C6F39FFC-DE6C-4142-AC2A-070706419D1E.jpg
 
   / GC17xx SSQA for DL95 #15  
First I need to get the right ssqa for the GC FEL, the one from MF I found uses the pins to attach and I would rather have the lever on each side like you have on your DL95 it would give more attachment options then the one from Massey/AGCO or at least the one I seen.

I am going to the dealer tomorrow where I bought my 1705 and I will find out what he can do for a price, he has tried to get ahold of me a few times to see how I like my scut but I would rather talk right to him plus I want to see about a valve for the front end for a grapple set up and see what he has on his lot heeheehee.

I just found the ssqa setup, man I must of been sleeping the 1st time so ya I am good.
 

Tractor & Equipment Auctions

2005 CATERPILLAR 12H MOTOR GRADER (A51406)
2005 CATERPILLAR...
1999 MACK CH613 WATER TRUCK (A50854)
1999 MACK CH613...
2021 Ford F-250 4x4 Ext. Cab Pickup Truck (A49461)
2021 Ford F-250...
2015 Chevrolet Silverado (A50323)
2015 Chevrolet...
2015 KENWORTH T800 MID-ROOF SLEEPER (A50854)
2015 KENWORTH T800...
2015 VOLVO TRUCK VN SERIES (A50854)
2015 VOLVO TRUCK...
 
Top