Little Mac
Bronze Member
Can anyone ( I did a search and came up with nothing on this ) tell me what are the fittings used on our tractors? I would like to know are these JIC 37 degree ends? I know they run 1/4" line but is there a better alternative to the oem lines? I have had several go out on me over the years and my local hose shop isn't very helpful with a simple small line. My nearest MF dealer is an hour away. So I would like to see if I can find a better source for QUALITY hoses.
This last line that ruptured on me was the outer most on the on the loader control and is the male quick connect to the rear (blue/yellow ties on it). Part #71515956 so now the poor tractor just sits until I can get this one replaced.
Lastly I thought I read somewhere that some tractores where not plumbed correctly from new, mine will not allow you to move the mow deck UP when the backhoe is attached. I would like to verify the hose routing as well. Could someone point me in the right direction?
I really appreciate the help.
-Mac
This last line that ruptured on me was the outer most on the on the loader control and is the male quick connect to the rear (blue/yellow ties on it). Part #71515956 so now the poor tractor just sits until I can get this one replaced.
Lastly I thought I read somewhere that some tractores where not plumbed correctly from new, mine will not allow you to move the mow deck UP when the backhoe is attached. I would like to verify the hose routing as well. Could someone point me in the right direction?
I really appreciate the help.
-Mac
Last edited:
