Gc2400

[boatboat]

Hey guys,
Does anyone know the bearing numbers for the idler pulley for the deck?
Or the idler pulley itself ?

Over here parts are very expensive and nobody will help unless you pull it off first.
Thanks in advance.
You guys helped me last time it was very much appreciated
Wayne

 

[irvingj]

I've never replaced mine, and my mower deck is still buried in winter storage -- I assume you'd like the bearing mfr number, not the Massey-Ferguson part number? (I'm guessing the mower deck for my 2300 is the same as for the 2400 tractors...)

 

[boatboat]

Yes I think 2300 and 2400 are the same?
My service book has a picture of a 2300 on it?
Maybe different models were sold in diff countries.
I'm in Queensland Australia

 

[Dmacleo]

Hey guys,
Does anyone know the bearing numbers for the idler pulley for the deck?
Or the idler pulley itself ?

Over here parts are very expensive and nobody will help unless you pull it off first.
Thanks in advance.
You guys helped me last time it was very much appreciated
Wayne

the 2325 and 2326 decks (60 inch) if talking about the idler that is on the spring arm the pulley and bearing are one unit.
part # 3606801M91 and is approx 57$
its the model # of DECK that matters, not model of tractor.

 

[boatboat]

Thanks, you are very correct.
Mine is a 2325 deck

 

[irvingj]

Thanks, Dave. I was going to say that... really! (I have the 2325, figured that's what boatboat had, too.)

For a jen-yoo-ine M-F part, that's pretty reasonable!

 

[boatboat]

I'll get a quote tomorrow
in Australia.
When I google that part number they are all in the USA.
Thank again

 

[boatboat]

2 days so far without even a quote from the dealer!
If the price is far I'll buy it if not pull the idler off and find a replacement pulley
I'll let you know the price here
Thank you

 

[boatboat]

Ok price in Aust dollars $265.
Iseki idler pulley# 859301420010 is only $47.77 Aud but is not available.
I hope this helps others
Thanks
Wayne

 

[irvingj]

Wow... wonder how much it would cost for someone on the US west coast to buy it here and mail it to you... I've done the same for some hard-to-get airplane parts for folks in Europe -- postage, import duty, etc wasn't cheap.

 

[boatboat]

HI I think weight and size will kill it.
I've imported heaps of parts over the years but freight has gone up so much.
Thanks again

 

[Dmacleo]

its only 5lbs max. mines been off before. I can lift it with messed up wrist in a splint no issues.

 

[boatboat]

Hi Dmacleo,
Not sure if you have time to measure Weight, and ring for a price for postage or maybe air freight to Brisbane Qld Australia post code 4501.
I will pay you for your trouble , other problem is the US dollar against AUD dollar.
If you don't want to I understand fully.
Freight these days has gone through the roof .
Thanks

 

[Dmacleo]

Hi Dmacleo,
Not sure if you have time to measure Weight, and ring for a price for postage or maybe air freight to Brisbane Qld Australia post code 4501.
I will pay you for your trouble , other problem is the US dollar against AUD dollar.
If you don't want to I understand fully.
Freight these days has gone through the roof .
Thanks

its not something I can easily do, sorry.
disabled and not in town near dealer often.
run part numbers on amazon, may find them may not.

 

[boatboat]

Hey completely understand
I'll pull off the idler and find a replacement one over here.
By the way of the money exchange and freight it wouldn't be much cheaper anyway.
Happy Easter to everyone