MossRoad
Super Moderator
- Joined
- Aug 31, 2001
- Messages
- 65,604
- Location
- South Bend, Indiana (near)
- Tractor
- Power Trac PT425 2001 Model Year
Straight. 
Gear drive vs hydro
- Thread starter deere755
- Start date
- Views: 82187
Egon
Epic Contributor
Hey, that will get you up the hill but how do you get down?
MossRoad
Super Moderator
- Joined
- Aug 31, 2001
- Messages
- 65,604
- Location
- South Bend, Indiana (near)
- Tractor
- Power Trac PT425 2001 Model Year
End-over-end, of course!Hey, that will get you up the hill but how do you get down?
Egon
Epic Contributor
I should have realized that. Side stepping is a lot of work!
MossRoad
Super Moderator
- Joined
- Aug 31, 2001
- Messages
- 65,604
- Location
- South Bend, Indiana (near)
- Tractor
- Power Trac PT425 2001 Model Year
I should have realized that. Side stepping is a lot of work!
Side stepping is like a gear tranny... clunk, clunk, clunk
and end-over-end is like a hydro... weeeee!
Egon
Epic Contributor
Moss, where have you been??
That is the exact description of gears with a missed shift in uncontrolled descent. Now if you get some side cut then it's just the whoosh swhoosh of a controlled hydro carved descent!
Leaving them pretty oscillating snow tracks behind!