Gear shift on L series DT models

   / Gear shift on L series DT models #1  

stonebase

Bronze Member
Joined
Nov 20, 2003
Messages
84
Location
Volant, PA
Tractor
Kubota L3130
Can someone tell me where the gearshift is located on an L series DT model. Is it a short shaft shifter or a longer shaft? I'm looking into the L series gear model and the local dealers do not have them on their lots.

I am about 6'6" tall and fit / ergonomics is very important to me. Just curious how it is located in relation to the shuttle shift, loader control etc, before I pursue any further with the dealer.

Thought there would be a picture on the website but could not find anything.
 
   / Gear shift on L series DT models #2  
On my L4300 it is about 18 inches high?and just left of center close to the steering column,couple inches right of clutch pedal.Mine is a 8f/2r no shuttle.Loader control is far right and forward.If you want a pic I can take one tomorrow.
 
   / Gear shift on L series DT models
  • Thread Starter
#3  
<font color="orange"> On my L4300 it is about 18 inches high?and just left of center close to the steering column,couple inches right of clutch pedal.Mine is a 8f/2r no shuttle.Loader control is far right and forward.If you want a pic I can take one tomorrow. </font>

Thanks for the reply, actually I should of specified the Grand L series. I was under the impression that it was on one of the fenders, but I was not sure which one, nor how big it was.
 
   / Gear shift on L series DT models #4  
The shift is the to the left of the seat. They are very easy shifting and as much as I prefer the other transmissions for most work they are a great operating unit. The sales on them are not as good as on the hydro or GST but we do find people that have been running the straight gear drives and prefer them bu the sales on them account for single digit percentages of the units we sell.
 
   / Gear shift on L series DT models #5  
Here's a pic showing where it is on the L3830...

It's very easy to operate.
 

Attachments

  • 390359-kubota.JPG
    390359-kubota.JPG
    38.5 KB · Views: 207
   / Gear shift on L series DT models
  • Thread Starter
#6  
Thanks guys, thats exactly what I needed to know!! /forums/images/graemlins/cool.gif
 
   / Gear shift on L series DT models
  • Thread Starter
#7  
<font color="orange">The sales on them are not as good as on the hydro or GST but we do find people that have been running the straight gear drives and prefer them bu the sales on them account for single digit percentages of the units we sell. </font>

Art,

Realizing how small a percentage sales these gear models represent, how is Kubota's distribution system setup to accomodate a request for one when it arises??
 
   / Gear shift on L series DT models #8  
Are the DT's really a small percentage ????? I don't know why. If you don't mind gears, it's the best.

Between the flat deck, adjustable seat, and tilt steering, I doubt there are many people who would feel cramped on an L series. The range and gear levers are well clear on the left side of the seat. The shuttle is tucked nicely under the left side of the steering wheel. It's luxurious compared to my old gear Yanmar.
 

Tractor & Equipment Auctions

2013 Ford F-550 4x4 Ext. Cab Auto Crane 6406H 6,000LB Crane Service Truck (A50323)
2013 Ford F-550...
2014 Ford F-450 Crew Cab Knapheide Service Truck (A50323)
2014 Ford F-450...
2015 Chevrolet Express Passenger Bus (A50323)
2015 Chevrolet...
2023 BANDIT SG-75 STUMP GRINDER (A51242)
2023 BANDIT SG-75...
2023 CATERPILLAR 299D3XE SKID STEER (A51242)
2023 CATERPILLAR...
2022 ISUZU NQR 18FT FLATBED (A51222)
2022 ISUZU NQR...
 
Top