good deal or not

   / good deal or not #1  

coryip

Member
Joined
Feb 26, 2004
Messages
31
Location
ny
Tractor
deere 4200 hst
i have an opportunity to get a 2001 JD 4200 HST with about 200hrs, JD 420 loader, Bush Hog 5'BB, Bush Hog rotary cutter, and a Woods finish mower for 12K. tractor looks to be taken care of and in good shape. should i keep shopping or consider this CUT. Also what backhoes would work on this tractor, are the JD 47,48 the only ones and how much should i expect to pay for these or any other BH that would work.
THANKS
 
   / good deal or not #2  
RUN, and snap this deal up. I assume it's a MFWD model, and a comparable new 4210 with 420 FEL would set you back at least $16,500. The other implements are icing on the cake, and 200 hours is barely broken in. The only JD BH I know of that would fit is the 47, and you would need the rear hydraulics for it. A new one would run you something like $5500, I am sure there are other brands that would fit but can't advise you which ones.
 
   / good deal or not #3  
That is a SUPER deal. Woods makes a full frame backhoe that will fit. I just got a quote for one to fit my 26HP Cub (comparable to the 4200) for $6200 installed with trucking. I don't know what the JD backhoes cost, but you may be better off to stay with the same color on something like that.
 
   / good deal or not #4  
That is a super deal.

If you are just wondering about the hoe, both suggestions are dead on. If you are going to buy this FOR a hoe, you MIGHT want to check around. You will pay a premium for a hoe by itself. So you could save about $1000 getting one on a new machine. Plus the new 4210 has been beefed up in the hydraulics and has the eHydro transmission.

So, $12K for the 4200/420 + $6K for a 47 is $18K. Plus those gravy attachments are included.

A super deal on new would be ~$21K, no gravy attachments. Is $3K worth it for new warranty, eHydro, and beefed up hydraulics? (and No free tools) You decide... (Could go either way...)

The 48 isn't listed as an option for the 4200/4210. The 43x0 is where that starts. I don't know but that it wouldn't work on a NEW 4210 with the new hydro pump.
 
   / good deal or not #5  
If it is on ebay be carefull. There have been many frauds lately.
 
   / good deal or not
  • Thread Starter
#6  
no its a local deal, and it looks like i will get it for $11800.
 
   / good deal or not #7  
Say, Uh Coryip where did you say that deal is? Wait while I hook up my trailer erh... whooosh I'm off ...Enjoy.., that's a bargain that every time you use it your face will hurt because of the perpetual smile ,,Mandantory of course when anyone gets a tractor but when you get THE DEAL!! well that's icing on the cake /forums/images/graemlins/tongue.gif /forums/images/graemlins/tongue.gif /forums/images/graemlins/laugh.gif /forums/images/graemlins/grin.gif
 

Tractor & Equipment Auctions

(10) 24' CORRAL PANELS (A51243)
(10) 24' CORRAL...
1967 Minneapolis- Moline Super  M670 (A50514)
1967 Minneapolis-...
BUNDLE OF GALVANIZED CORRUGATED METAL SHEETS (A51244)
BUNDLE OF...
New Power Line 400 Plastic 3pt. Spin Spreader (A50774)
New Power Line 400...
PALLET OF SPREADER PARTS (A51244)
PALLET OF SPREADER...
2017 Ram 5500 Valve Placer Bucket Truck with Versalift STP36NE - 41FT Working Height, Low Miles (A52128)
2017 Ram 5500...
 
Top