lzicc
Platinum Member
The L3560 Implement pump output is 8.1 GPM and the 4060 is 9.4 GPM. Will the higher GPM have an effect on speed of moving the backhoe? I know my current BH77 just seems slow moving it side to side. Slow to me anyhow.
Comparison Got another question on Implement Pump Size
- Thread starter lzicc
- Start date
rswyan
Super Member
- Joined
- May 12, 2004
- Messages
- 9,779
- Location
- Northeast Ohio
- Tractor
- Kubota B2910, Cub Cadet Pro Z 154S, Simplicity 18 CFC, Cub Cadet 782
If your BH77 is anything like the BH4690B on our B2910, Kubota probably installed restriction orifices in the lines at the control valve from the factory ...
Try removing those and see how she does ...
OP
lzicc
Platinum Member
Since I am trading up possibly to a Grand, I probably will just let it go on the L3800, but I wonder if the Grand will have the same issue.
MtnViewRanch
Elite Member, Advertiser
- Joined
- Mar 19, 2005
- Messages
- 10,456
- Tractor
- Mahindra 7520, Mahindra 3215HST, Case 580 extendahoe, Case 310 dozer, Parsons trencher, Cat D6,
I would not think that there would be any restrictors in a high use system without an additional cooling system. The restrictors would really heat up the oil. 
My guess would be that the hoe could move 16% faster on the L4060.
My guess would be that the hoe could move 16% faster on the L4060.