Got me a sweeper

   / Got me a sweeper #1  

MetalChicken

Bronze Member
Joined
Oct 17, 2004
Messages
86
Location
Chester - UK
Tractor
Case 4230
I've been looking for a sweeper/collector for about 12 months to collect cut grass left by my 8' finsh mower.
Finally found one on eBay and won the auction today. /forums/images/graemlins/smile.gif
It's got a 6' brush on it and is PTO driven (although I'm toying with the idea of driving it with a hydraulic motor - no reason, just a bit of fun). One downer is that it doesn't have a hydraulic tip, but that's def. going to be fixed within the next few weeks.
You may wonder why I want one of these? Well here in the UK if you leave largish clumps of cut grass on the ground they will matt down and kill the grass underneath unless the weather is dry enough to dry up the cut grass allowing it to effectively 'disappear'.
other uses for this sweeper will be keeping our new tarmac driveway clean and maybe also doing a bit of contract paddock cleaning. To help with this I'm going to fit a row of spring tines in front of the brush to break up the horse droppings and matted grass.
The used sweepers I've found for sale here go for about $2000 for a 4' sweep and about $3000 for a 6' sweep. I paid A LOT less than that
/forums/images/graemlins/smirk.gif
 

Attachments

  • 590963-SWEEPER.jpg
    590963-SWEEPER.jpg
    57.9 KB · Views: 535
   / Got me a sweeper #2  
Cool!

Can I borrow it if I promise to be your friend??
 
   / Got me a sweeper #3  
Pretty neat. Sounds like you have all kinds of uses for it already /forums/images/graemlins/laugh.gif
Is there a dump feature on these things?
 
   / Got me a sweeper
  • Thread Starter
#4  
Yep it's got a manual dump system right now - i.e. you pull on a rope and hopefully it should tip up and empty. Now call me geeky, but that seems way too simple to me /forums/images/graemlins/smirk.gif

So I think I'll be adding a bit of reinforcement and either one or two hydraulic rams to make the job more fun, sorry, efficient
/forums/images/graemlins/cool.gif

Once I get it delivered here I'll get some pictures posted.
 
   / Got me a sweeper #5  
I use a small 12 volt winch to dump a similar device. This method does not cost much, is easy to install and does not require dismounting from the tractor. Just a thought.
 
   / Got me a sweeper #7  
i agree with what you said about the clumps rotting and killing the grass below, i guess its a UK thing...
being cheap i made a little thing that fits on a side deflecter shield that throws the grass in the air
this way it lands in sigle bits and not as clumps, and el viola no dead spots
i guess your mower in rear discharge so this wouldnt work
now you just need another tractor to put it on /forums/images/graemlins/grin.gif
 
   / Got me a sweeper #8  
You guys cut your grass so short no wonder it clumps /forums/images/graemlins/smirk.gif I used to marvel at how short my uncle grass was-1/2" or so. Just like a rug. I cut at 3" and sometimes that's too short in the summer.
 
   / Got me a sweeper #9  
</font><font color="blue" class="small">( .................. i made a little thing that fits on a side deflecter shield that throws the grass in the air
this way it lands in sigle bits and not as clumps, and el viola no dead spots )</font>

I would like more information on this..... possibly a picture or two????? thanks Junk....
 
   / Got me a sweeper #10  
the mowers are all apart at the moment but ill rig it up so you can see what i mean
watch this space till tomorrow (its dark and snowing /forums/images/graemlins/frown.gif)
 
 

Tractor & Equipment Auctions

2022 FORD F-150 XL EXT CAB TRUCK (A51406)
2022 FORD F-150 XL...
2013 BIG TEX PRESSURE WASHER TRAILER (A52472)
2013 BIG TEX...
2023 PETERBILT 579 TANDEM AXLE SLEEPER (A52576)
2023 PETERBILT 579...
LMC G300JD LOT NUMBER 246 (A53084)
LMC G300JD LOT...
BESTWAY AG VSK50 LOT NUMBER 105 (A53084)
BESTWAY AG VSK50...
1999 Ford F-550 12FT. Flatbed Truck (A51692)
1999 Ford F-550...
 
Top