Grand L functions / dash display ??

[Fallon]

Same as the others... I fiddled with it when I got it or do an oil change. Other than that I leave it alone. I'd like to change HST sensitivity occasionally, but it's to much of a pain. John Deere has a nice dedicated knob for that.

The controls for the dash is one of the worst design flaws of the Kubotas. 1 button to run everything. It wouldnt have been hard to put in a knob to scroll through the menus. You dont need to mess around in there much, but it could be so much easier for little cost or engineering.

 

[Corkpuller]

Thanks fellers, just what I wanted to know.

I'd like to change HST sensitivity occasionally, but it's to much of a pain. John Deere has a nice dedicated knob for that.

The controls for the dash is one of the worst design flaws of the Kubotas. 1 button to run everything.

And that is exactly how I see it.
I致e yet to get my hands on one to fiddle with it, but I will.
The other tractor on my radar is the Deere 3039R or 4066R.

Thanks

 

[mljenkins]

Thanks fellers, just what I wanted to know.




And that is exactly how I see it.
I致e yet to get my hands on one to fiddle with it, but I will.
The other tractor on my radar is the Deere 3039R or 4066R.

Thanks

I agree the Kubota controls suck. But like others said you don’t really change them that much. The auto throttle advance is the only thing I disable a lot when mowing but it has a dedicated button.

I looked at the 4066R a few years ago when I decided on Kubota. The controls were definitely nicer on the JD IMO but the cab looked like it would be hard for me to clean and I liked the swing out windows on the L6060HSTC. Granted if you aren’t purchasing a cab that’s a moot point. There were other things well including the entire sales pitch.

I wish Kubota would redo their intellipanel. In today’s market it doesn’t seem far fetched to put something super advanced like a touch screen in, not that I’d recommend it, but tech seems to be cheap these days. At least add another button or two to cycle up and down and select.

 

[SDT]

I agree the Kubota controls suck. But like others said you don’t really change them that much. The auto throttle advance is the only thing I disable a lot when mowing but it has a dedicated button.

I looked at the 4066R a few years ago when I decided on Kubota. The controls were definitely nicer on the JD IMO but the cab looked like it would be hard for me to clean and I liked the swing out windows on the L6060HSTC. Granted if you aren’t purchasing a cab that’s a moot point. There were other things well including the entire sales pitch.

I wish Kubota would redo their intellipanel. In today’s market it doesn’t seem far fetched to put something super advanced like a touch screen in, not that I’d recommend it, but tech seems to be cheap these days. At least add another button or two to cycle up and down and select.

I too shopped the 4066R before buying my L6060.

I really wanted EPTO, not offered on the L6060, and the 4066R engine, though smaller than that used on the 6060, is intercooled and produces a bit more HP.

I could not accept the one piece wheels provided with R-4 tires though, and the JD dealer was both arrogant and generally unhelpful, as well as 25 miles further away.

SDT

 

[Jchonline]

Then what is the point of having the options to make changes?

I don稚 have any experience with any of it, reason for my questioning.
The one feature that I know I壇 use and change for different tasks is the roll out.

Because everyone has their own preferences and application of use. Same for my M62, after I tweaked it for my applications I dont mess with it much anymore.

 

[crazyal]

My 40 series GL has the knob for the HST response and I rarely adjust it. However I have had it move (maybe my pants rubbed against it) and was caught off guard. I almost think I would prefer it to be push button. But if it ever dies 20 years down the road a pot is much easier to replace. Like the others I found the settings I like best and leave them there. I do have different settings for snow blowing in the winter (like stall guard off) than in the summer but I can't remember actually adjusting them while using it.

 

[Grateful11]

Then what is the point of having the options to make changes?

I don稚 have any experience with any of it, reason for my questioning.
The one feature that I know I壇 use and change for different tasks is the roll out.

Personally I don't think you would change it as much as you think. Our sons L3940 has over 2100 hours and HST response control on it is a knob. As far as I know it never gets changed. The loader on that particular tractor is used 365 days a year for feeding ground feed and round bales to a decent size cattle herd on a concrete feed lot. BTW: It's never had a repair, knock on wood.

As far as the Deere vs. Kubota. He recently purchased a new L4060. They looked at everything and the one thing that has stood out on the Kubota Grand L's that Deere can't even touch is the addition of having 2 speeds in each of the 3 ranges and shifts up and down at the flick of a lever. That is one of the most useful features that everyone that runs either one likes the most. As you can see by the signature no one around here is partial to any one color. His JD 5065M has been great and now has about 1400 hours and has only had one repair, a gasket behind the water pump. Deere failed to put one in at the factory, only very thin layer of sealant. A $6 gasket and $250 worth labor and all was well.