HP942
Silver Member
I emailed him today, he doesn’t make the mini grapple for SSQA, but he does the horizontal.
Grapples for Bx23s, or thumb?
- Thread starter wyowy
- Start date
- Views: 9998
/pine
Super Star Member
- Joined
- Mar 4, 2009
- Messages
- 15,763
The Thumb - Add-on Grapple Attachments
www.greens-machine.com
HP942
Silver Member
Heat, been looking at those for my pallet forks.
thanks for your help. I ordered one last week.. 4-6 week delivery. will keep you posted.Doing a quick google search yielded a number of thumbs out there and you would need to find one the right size. You could maybe even have one custom made for not too much I would think. They are not very complicated. You do need to change the pivot pin of the bucket to a longer one to accommodate the thumb hinge point. And I would stay away from the clamp on type of thumbs since they can sometimes create damage.
I would not go too much smaller than a 12 inch bucket. Depending on soil type you may find that a smaller bucket just gets plugged up and then you have to use a spade to clear out the bucket every time. Kind of defeats the purpose.
I hope this helps!!
Here is a link you can check out.
Factory Mount Barracuda BH Thumb
www.bxpanded.com
