Greasing the MMM....

[Mike_C]

I can easily get to the outer two pulleys with the MMM on, but can't get to the one in the center without taking the deck off the tractor.
I use an air-powered grease gun with a non-flexible tube. I may be able to do it if I change it to a flexible hose, but then that would slow down the greasing of the FEL and backhoe. With the stiff tube I can keep the grease gun in one hand, and a screwdriver in the other hand to scrape out the dirt that gets packed in around the zerks on the backhoe and FEL, then with one hand push the gun onto the zerk and pull the trigger.

 

[sneaky_pete]

Ditto - you can reach them all relatively easily with a flexible tube on a hand-pump gun.

 

[Egon]

Add a little pipe and bring all the deck zerks to one common accessible location.

The u joints will still be a problem

Egon