MBDiagMan
Gold Member
- Joined
- Nov 1, 2004
- Messages
- 416
- Location
- Sumner, Texas
- Tractor
- John Deere 5045D, Grasshopper 61" with PowerVac,Gator 825i, Cub Cadet 2145
I just learned on another forum that there have been a lot of stripped axle splines on RZT mowers and possibly Z-Force.
To prevent this from happening, make SURE that the rear wheel hub bolts are kept tight. Once loose, the spline moves around and strips.
The information was specifically talking about a half inch shaft, which would be the RZT unit, but it sounds like this is a good inspection tip for a Z-Force as well.
Just wanted to pass this valuable info along to my Cub friends here on the forum.
Have a great day,
Doc
To prevent this from happening, make SURE that the rear wheel hub bolts are kept tight. Once loose, the spline moves around and strips.
The information was specifically talking about a half inch shaft, which would be the RZT unit, but it sounds like this is a good inspection tip for a Z-Force as well.
Just wanted to pass this valuable info along to my Cub friends here on the forum.
Have a great day,
Doc