texanjim
Member
- Joined
- Mar 27, 2013
- Messages
- 29
- Location
- Wales
- Tractor
- McCormick CX105, McCormick CX95, Case 1494, Grillo G85D
Hi all,
I posted earlier in the year about my Grillo G85d not staying in forward or reverse gear. I solved with some help from here by replacing the missing spring that holds the lever in place.
I have been using the machine this season and found the only real problem I have with it now is that the PTO lever slips out of gear when tilling. After engaging it and travelling about 3 yards or so, the PTO disengages through the vibration of tilling. My 'Work around' is to simply hold it in the engaged position while tilling, so I can easily switch to reverse etc on the end of the beds I'm tilling. This isn't ideal though, as you can guess.
Does anyone have any experience of this? It seems to be an internal part that holds the PTO in gear in this case. If so, does anyone have any details.
Thanks in advance for your help.
I posted earlier in the year about my Grillo G85d not staying in forward or reverse gear. I solved with some help from here by replacing the missing spring that holds the lever in place.
I have been using the machine this season and found the only real problem I have with it now is that the PTO lever slips out of gear when tilling. After engaging it and travelling about 3 yards or so, the PTO disengages through the vibration of tilling. My 'Work around' is to simply hold it in the engaged position while tilling, so I can easily switch to reverse etc on the end of the beds I'm tilling. This isn't ideal though, as you can guess.
Does anyone have any experience of this? It seems to be an internal part that holds the PTO in gear in this case. If so, does anyone have any details.
Thanks in advance for your help.