Ground PSI

   / Ground PSI #11  
Many of these tires have a pressure of 22 psi, but that seems two high for a ground pressure. Am I missing something.

It may be max pressure rating for the tire, not the recommended inflation pressure for that tire on the mower. Some of my mowers have spec'd as little as 10psi for the rear tires, which is well below what the tire can handle.
 
   / Ground PSI #15  
Agree with ArlyA, and didn't see any part of the video's that showed it on a finished lawn doing a "zero turn" which most certainly will leave a scuff mark.
 
   / Ground PSI #16  
Agree with ArlyA, and didn't see any part of the video's that showed it on a finished lawn doing a "zero turn" which most certainly will leave a scuff mark.
a wheeled ZT would make a bigger scuff mark!.. there's MUCH less PSI on a tracked ZT..
 
   / Ground PSI #17  
a wheeled ZT would make a bigger scuff mark!.. there's MUCH less PSI on a tracked ZT..

I’m guessing you don’t have a lot or probably any experience running tracked machines. That thing is going to rip up any grass and if the soil was soft enough to actually need that you can count on the grass being pretty much destroyed trying to turn.
 
   / Ground PSI #18  
Agree with ArlyA, and didn't see any part of the video's that showed it on a finished lawn doing a "zero turn" which most certainly will leave a scuff mark.

You can see one turn at :53 into the video. It's a wide turn and you can see it slightly damaged the turf. It's highly suspicious as to why they didn't show a "zero turn" mower executing a zero turn maneuver. :(
 

Tractor & Equipment Auctions

Master MGH8500IE 8,500-Watt Generator  Electric Start, 18HP Honda Engine (A46884)
Master MGH8500IE...
2001 Dodge Ram 2500 Stahl Service Truck (A45336)
2001 Dodge Ram...
Small Food Plot Drop Spreader (A47809)
Small Food Plot...
Crown PE4000-60 Riding Jack (A47809)
Crown PE4000-60...
TOFT 750 Hyd Breaker Hammer (A47809)
TOFT 750 Hyd...
2005 New Holland LS170 Skid Steer (A47809)
2005 New Holland...
 
Top