Hello, just joined this forum and have a question. I have a 2014 John Deere 4105 I bought new. It has the H165 FEL. The problem I am having is, the part of the arms that the bucket hooks to are not even. This has just happened and I can't find anything bent, but, when I take just the bucket off, the arms are not aligned and they used to be. I can't find an adjustment for this. Any chance someone can help me with this, or point me in the right direction? Thanks
Loader h165 FEL Question
- Thread starter El Kabong
- Start date
- Views: 2719
beenthere
Super Star Member
- Joined
- Aug 16, 2001
- Messages
- 18,445
- Location
- Southern Wisconsin, USA
- Tractor
- JD_4x2_Gator, JD_4300, JD_425, JD_455 AWS, added JD_455, JD_110, JD_X485(sold)
:welcome: to TBN
Please post some photo's that show the problem.. may help with an answer.
Please post some photo's that show the problem.. may help with an answer.
That's a good idea. I will pull the bucket tomorrow, that way my question will make sense. Thanks
Zebrafive
Super Member
Thanks for the diagram, it is part number 9 that is mis-aligned. I looked at the pins, ( 17 ) and they were still there, but, I didn't remove them. Thanks again for another thing to look for. I will check that and report back in case anyone else has this issue.
Zebrafive
Super Member
If a pin, 17 did not shear (one of them), the timing rod, 16 may have twisted. I guessing a pin sheared.
beenthere
Super Star Member
- Joined
- Aug 16, 2001
- Messages
- 18,445
- Location
- Southern Wisconsin, USA
- Tractor
- JD_4x2_Gator, JD_4300, JD_425, JD_455 AWS, added JD_455, JD_110, JD_X485(sold)
Agree with Zeb that #17 is sheared off.. happens and sometimes is hard to notice. I put the bolt back in from the bottom up, then it drops away when sheared and doesn't appear to "look" like it is ok. I use a lock nut on top and keep a supply of the shear bolts.
beenthere
Super Star Member
- Joined
- Aug 16, 2001
- Messages
- 18,445
- Location
- Southern Wisconsin, USA
- Tractor
- JD_4x2_Gator, JD_4300, JD_425, JD_455 AWS, added JD_455, JD_110, JD_X485(sold)
:thumbsup: :thumbsup: thks for letting us know.. bt
