Harbor Freight Tools that don't suck

   / Harbor Freight Tools that don't suck #11,231  
Recently picked up two HF predator 3500 inverters. As A test I set one up to run our 14k BTU window AC unit. It ran two hours Monday, then it ran it a full 10 hours yesterday before finally running out of fuel.

12 hours at 35-40% load on 2.5 gallons of fuel and couldn't even hear it inside the house.

Going to take both and the 50 amp parallel kit out to the camper and see how they do with both AC units and both fridges on

I've been eye-balling one of them thanks for the review.
 
   / Harbor Freight Tools that don't suck #11,233  
My little Johnny needs the engine replaced. Drive belt on my Craftsman failed. Tired of balancing little tractors on little bottle jacks and jack stands. Needed something better. Shopped around for mower lifts. Lowes, Home Depot, TSC, couple other local tool supply places, all had various units at widely varying prices. Checked out the Ye ole Harborer of Freight and learned they sell TWO styles. One is Pittsburgh branded for a hundred bucks. It is built light with tiny little wheels to move it around, just like all the MoJack and others at other places. The other is branded FISCHER and is listed at $200. It is built better than the best of the best $500 models in other stores and has nice 6" solid wheels on it. Checking the super coupons, they list FISCHER as a brand you cannot use the super coupons on. Checked the coupon database and found coupon 49357624 that gives $30 off until the beginning of August 2019.

2189_ITEM_750LB._HEAVY_DUTY_ATV_MOWER_HIGH_LIFT_JACK_1559703654.9098.png

EDIT* I bought it, assembled it, and used it. I'm perfectly satisfied and certain I've never seen a better built mower lift from anywhere.
 
Last edited:
   / Harbor Freight Tools that don't suck #11,234  
I've been eye-balling one of them thanks for the review.

Same here.

One of the two came out of the box with a crushed wheel. Called HF and they said bring it back and exchange so I did.

Then about 3 hours in one that had been sitting with a half tank of fuel I hadn't added stabil too started up and was rough idling. Kept surging. Called them and they said no problem, run it dry on fuel and bring it back for a new one.

From all the reviews I read some can have quirks at the get go but HF is great about replacing/exchanging them if they have any initial issues. Other than that they are great. One guy I saw has been using two to power his food truck and has almost 3k hours on each. Replace spark plugs and clean spark arresters every few hundred hours and good to go
 
   / Harbor Freight Tools that don't suck #11,235  
That's the essence of the HF experience: Prices are low because final quality control testing is left to the customer, instead of being performed before shipment. As for the customer ... well you need to have a sense of humor.
 
   / Harbor Freight Tools that don't suck #11,236  
That's the essence of the HF experience: Prices are low because final quality control testing is left to the customer, instead of being performed before shipment. As for the customer ... well you need to have a sense of humor.

I'll take the two extra trips to HF for two higher powered inverters for $600 less than one honda 3000iu inverter
 
   / Harbor Freight Tools that don't suck #11,238  
He's getting TWO for $600 less than the price of ONE. So he has a complete spare AND $600 to spend on something like fuel, or even a replacement warranty if there are issues with one. Who needs parts when you have a spare generator to put in place while you exchange the failed one at the local store? I'd personally opt for redundancy over part availability.
 
   / Harbor Freight Tools that don't suck #11,239  
Not to mention that there are reviews with over 3000 hours and running on the quiet inverter ones. They sound extremely encouraging if you scout the internet looking for testimonial. I just out cash down to get a new Coachmen Apex Ultra Lite camper in 28' floor plan, I'm already positive that it will be getting the larger HF inverter generator.
 
   / Harbor Freight Tools that don't suck #11,240  
Last week I bought the Lynxx pole saw and chainsaw. I am very impressed with both.
 

Tractor & Equipment Auctions

DEUTZ MARATHON 60KW GENERATOR (A58214)
DEUTZ MARATHON...
2011 GMC Sierra 1500 4x4 Ext. Cab Pickup Truck (A56858)
2011 GMC Sierra...
16ft x 8ft Flat Bed (A57454)
16ft x 8ft Flat...
2009 International 4300 Truck, VIN # 1HTMMAAN79H163641 (A57453)
2009 International...
550 GALLON FLAT BOTTOM POLY TANK (A58374)
550 GALLON FLAT...
2019 MACK PINNACLE (A58214)
2019 MACK PINNACLE...
 
Top