Hazard lights for TC33d

   / Hazard lights for TC33d #11  
I ended up going with some LED replacements from Amazon and fabricating a simple cage out of some scrap metal to protect them. It's not as elegant as the original, but it's held up pretty well so far.
Got a poor your setup?
 
   / Hazard lights for TC33d
  • Thread Starter
#12  
I didn't do anything custom. That's the way they come on the newer TC
That's interesting. I have never seen a TC33 with the lights mounted that way, nor have I seen one with 4 lights. I assumed they were a custom mount, since the base for the old-style bracket is still there. NH is also usually very insistent that the ROPS not be drilled, yet those lights are bolted on through the ROPS.
 
   / Hazard lights for TC33d #13  
That's interesting. I have never seen a TC33 with the lights mounted that way, nor have I seen one with 4 lights. I assumed they were a custom mount, since the base for the old-style bracket is still there. NH is also usually very insistent that the ROPS not be drilled, yet those lights are bolted on through the ROPS.
My TC45DA lights are just like that.

There are two bolts holding each light on and an about 1” hole for the wires to go through.
 
   / Hazard lights for TC33d
  • Thread Starter
#14  
My TC45DA lights are just like that.

There are two bolts holding each light on and an about 1” hole for the wires to go through.
I missed that Hughman had a DA model.

When I browsed through a bunch of the TC33 and TC33D models for sale, they all looked like mine... and more than half of them were missing their lights.

Long lane tractor is a NH graveyard in Elizabethtown PA They usually have plenty of used parts on hand that will fit your tractor. I have gotten parts for them shipped to me and the have been very helpful.
I'm familiar with them. When I cracked the clutch housing in two on my tractor a few years ago, the dealer wanted $7000 to replace the part with new (and that was "if everything went back together OK"). I found a used part at Long Lane for abut half the price of new and had a local tractor/heavy equipment guy do the repair. He charged $3000 and did a few other things while he was at it at no extra charge.
 

Tractor & Equipment Auctions

Kuhn Krause 8200 Disc (A47369)
Kuhn Krause 8200...
2025 Wolverine TCR-12-48H Trencher Attachment (A47484)
2025 Wolverine...
4Yd Dumpster (A44571)
4Yd Dumpster (A44571)
1994 Toyota 6000lbs 2 stage forklift (A46877)
1994 Toyota...
JLG 16ft 6,500lb T/A Lo Riser Flatbed Trailer (A44571)
JLG 16ft 6,500lb...
2019 Ford F-550 V-Mac DTM70 Air Compressor Flatbed Truck (A44571)
2019 Ford F-550...
 
Top