hazard lights
- Thread starter RandyP
- Start date
- Views: 1118
Mark_in_NH
Veteran Member
- Joined
- Mar 4, 2002
- Messages
- 1,555
- Location
- Moultonborough, New Hampshire
- Tractor
- New Holland TC35D w/ 16LA FEL
Randy,
On my TC35D the hazard lights are operated by the switch on the dash. They will work whether the key is on or not. BUT, they will only work if I want them to work.
I guess it's possible that the 40 series are wired differant, but it doesn't sound right to me.
On my TC35D the hazard lights are operated by the switch on the dash. They will work whether the key is on or not. BUT, they will only work if I want them to work.
I guess it's possible that the 40 series are wired differant, but it doesn't sound right to me.
jinman
Rest in Peace
- Joined
- Feb 23, 2001
- Messages
- 21,059
- Location
- Texas - Wise County - Sunset
- Tractor
- NHTC45D, NH LB75B, Ford Jubilee
Unless this is a recent change in design, it should not be that way. Like Mark said, on my TC45D the lights work with the switch on the dash. I've shut off my tractor and walked away, only to look back and see the flashers going. They work with the ignition On or Off.
