webbmeister
Gold Member
Anybody know this one right off hand?
Thanks,
Jim
Thanks,
Jim
Height to Top of ROPS on 25D
- Thread starter webbmeister
- Start date
- Views: 1239
John_Mc
Elite Member
- Joined
- Aug 11, 2001
- Messages
- 4,564
- Location
- Monkton, Vermont
- Tractor
- NH TC33D Modified with belly pan, limb risers & FOPS. Honda Pioneer 520 & antique Coot UTV
Jim -
If you have R4 tires, I can measure my 33D and let you know on Monday. If you have different tires, my measurement probably won't help. I know it fits under an 8 ft garage door with room to spare.
My NH brochure says 87.8" with Ag tires.
John Mc
If you have R4 tires, I can measure my 33D and let you know on Monday. If you have different tires, my measurement probably won't help. I know it fits under an 8 ft garage door with room to spare.
My NH brochure says 87.8" with Ag tires.
John Mc
OP
webbmeister
Gold Member
John:
Thanks! The second part of the answer is what I'm really after. I have turfs, but if you have room to spare at 8 feet, I'll go with an 8' door. The tractor is a 100 mile round trip away - you saved me a trip!
Thanks again,
Jim
Thanks! The second part of the answer is what I'm really after. I have turfs, but if you have room to spare at 8 feet, I'll go with an 8' door. The tractor is a 100 mile round trip away - you saved me a trip!
Thanks again,
Jim
OP
webbmeister
Gold Member
For the record, 85.5" top of ROPS to ground with turfs.
Jim
Jim
MikefromMI
Silver Member
I'll check tonight after work....
Mosey
Veteran Member
- Joined
- Jan 4, 2002
- Messages
- 1,565
- Location
- Conifer, Colorado
- Tractor
- 2000 New Holland TC29D with 7308 FEL, and top & tilt. 1950 John Deere B. 1940 Farmall A.
My TC29D measures 87 inches to the top of the roll bar and I have R4's. So, the 87.8 inches with ag tires sounds about right. That's about 4 inches over what would fit in a standard garage with a 7 foot door. I think New Holland should have thought this one through better. I don't see how that 4 inches is adding any significant amount of safety, so they should have lowered it 4 inches so it would fit in a standard garage. Actually, it would be safer because now I tend not to bother to put the roll bar up half the time, whereas if it would fit in the garage I would leave it up all the time.
hazmat
Elite Member
- Joined
- Feb 12, 2002
- Messages
- 4,051
- Location
- West Newbury, MA & Harrison, ME
- Tractor
- Kubota L5460HSTC
<font color=blue>That's about 4 inches over what would fit in a standard garage with a 7 foot door</font color=blue>
I'd be real happy if the ROPS on my TC18 was 1/2" shorter! thats how much too tall it is to get into my garage with the ROPS up/w3tcompact/icons/frown.gif
I'd be real happy if the ROPS on my TC18 was 1/2" shorter! thats how much too tall it is to get into my garage with the ROPS up/w3tcompact/icons/frown.gif
Kodiak
Platinum Member
- Joined
- Apr 25, 2002
- Messages
- 859
- Location
- Monroe,Washington
- Tractor
- New holland TC29-9x3 Woods 1012 FEL, Woods, 7500 Backhoe / Kubota L345DT 4WD, Kub FEL, Kub Backhoe
Danny:
That 4" comes in handy if you have a canopy. Which I'm hoping to get soon for my TC29.
That 4" comes in handy if you have a canopy. Which I'm hoping to get soon for my TC29.
MikefromMI
Silver Member
I'm @ 86 1/8 up & 68 3/8 down. My R4's are filled with beat juice. Funny, my manual says 84.9 up for all class 2. I replaced my clips on the ROPS pins with lynch pins since I only have the ROPS up when the BH is on. It gets hung on everything when I'm cutting. Did one wheeley too many. LOL