Hello again....have a problem with loader control

ronjhall · Dec 19, 2005

You may have a problem in the remote. But I would think the problem is at the valve. There is another thread going on about float on a 7610. In it there is a link to this thread. Click Here
Hope it helps.

LVKubota · Dec 19, 2005

( You may have a problem in the remote. But I would think the problem is at the valve. There is another thread going on about float on a 7610. In it there is a link to this thread. Click Here
Hope it helps. )

Dave and Rob @ Dave's Tractors have been incredibly patient with me all day while on the phone........as have all of you.

Here's what we/they think; you guys see how that front ball is waaay high? Thinking that cable went T/U. The 2 back balls control the curl no problem...that front control is limp as can be.

Next question.........any schematics on line on how to change that cable?

I've already busted 2 5mm allens trying to unscrew the allen at the bottom of that control.

LVKubota · Dec 20, 2005

FIXED!!! It couldn't have been any more simple!!! Those ball/plungers simply theard onto the cable coming in from underneath..........simply undo the 2 nuts holding the cable, shove cable into bottom of box, thread ball onto cable and tighten both nuts at bottom.....

Link

MikePA: Changed huge inline picture to a link. )

ronjhall · Dec 21, 2005

Glad to hear it is fixed.
Hope I didn't send you in the wrong direction. /forums/images/graemlins/blush.gif
What about the broken 5mm bolts? Do they need to be fixed?

LVKubota · Dec 21, 2005

( Glad to hear it is fixed.
Hope I didn't send you in the wrong direction. /forums/images/graemlins/blush.gif
What about the broken 5mm bolts? Do they need to be fixed? )

Thanks..........and thanks for even taking the time to give advice!!

The bolt is fine, it was the allen wrench that fragged. First it just broke so I cut the wrench to be able to put it in a socket and use a ratchet........then it twisted, looking like a piece of licorice. (black twizzler!!)

Kinda glad that the housing DIDN'T come apart!!!

I'm thinking because the tractor is a cab model, it kinda threw everyone off. Went to all the rental joints yesterday and the ROPS Kubotas controllers were not even close to this set up.

Darn 19 year old kid looked at it and had it fixed in less than a minute!!!

ronjhall · Dec 21, 2005

Darn 19 year old kid looked at it and had it fixed in less than a minute!!! 
Its gotten so I have to go to my youngest son for information on how to do some jobs. /forums/images/graemlins/blush.gif /forums/images/graemlins/grin.gif He has become so much smarter since he turned 30. /forums/images/graemlins/cool.gif
When you posted the picture I had to find out what type of tractor you have. Please fill out some of your bio. It will help solve your next problem faster. /forums/images/graemlins/tongue.gif