Help finding heavy-duty U-channel for custom loader attachment

   / Help finding heavy-duty U-channel for custom loader attachment #11  
2 pieces of angle turned out would work well
 
   / Help finding heavy-duty U-channel for custom loader attachment #13  
I would be tempted to find some 3x3x1/4 angle and use two pieces with the legs going away from the pins. You could even add braces from one leg to another to prevent them from spreading under load. Much easier to find angle in that size than channel.
2 pieces of angle turned out would work well
that's the best answer I've heard.
That is the way I built the brush fork frame many years ago:
P8110011.JPG


With a little extra rollback built in:
P9050004.JPG
P8110019.JPG


And chain slots:
chain slots.JPG


It can haul a lot of brush:
P9050033.JPG
 

Tractor & Equipment Auctions

2013 Ford F-150 4x4 Ext. Cab Pickup Truck (A48081)
2013 Ford F-150...
2008 International 4400 Terex Hi-Ranger HRX-55 55ft Material Handling Insulated Bucket Truck (A48081)
2008 International...
2017 Ford Explorer AWD SUV (A48082)
2017 Ford Explorer...
2001 Chevrolet C6500 Wrecker Tow Truck (A48081)
2001 Chevrolet...
2016 Ford Explorer SUV (A50860)
2016 Ford Explorer...
2015 Volkswagen Jetta Sedan (A48082)
2015 Volkswagen...
 
Top