Help identifying a Long tractor built in Romania

[ziggys37]

I just bought a Long tractor. The only decals on the hood just say Long. I did find a tag with a serial number and model number 2053. I have searched the internet but haven't been able to cross reference this to a model number from Long. I would guess it to be around 40 HP. It has a Long FEL mounted on it. It has flat fenders with a ROPS. It has a high and low shift lever and 4 forward gears and a reverse. The muffler is mounted through the hood. Any help identifying this tractor would be greatly appreciated.

 

[danny11b]

pictures? could be a 445, or a 460. These seem to be the most numerous.

 

[smstonypoint]

Have you tried TractorData.com - Long tractors sorted by model?

Steve

 

[ziggys37]

Have you tried TractorData.com - Long tractors sorted by model?

Steve

I have tried that. I can't find a cross reference for the model number in the serial number tag.
Here are some pics

 

[k0ua]

I had one of them. It is either a 2360 (36 horse) a 2460 (46 horsepower) or 2510 (51 horsepower) Possibly a 2610

In any case it is one of those series of tractors. They were from the 90's and sold by Long from Tarboro NC and made in Romania. I put a lot of hours on mine.

 

[k0ua]

pictures? could be a 445, or a 460. These seem to be the most numerous.

This is a later model than the 4 series.

 

[JD5210]

If you determine it is a Long 2360 PM me and I will e-mail you a wiring diagram if you want it. It came from a 2360 manual when I was working on a friends 2360.

I have attached a picture of my friends 2360, that is the only picture I have. Hope this helps.

 

[k0ua]

Lets start by telling us how many cylinders it has. This will narrow it down somewhat. Is it 3 or 4 cylinders? (look at the injector lines).

 

[ziggys37]

I had one of them. It is either a 2360 (36 horse) a 2460 (46 horsepower) or 2510 (51 horsepower) Possibly a 2610

In any case it is one of those series of tractors. They were from the 90's and sold by Long from Tarboro NC and made in Romania. I put a lot of hours on mine.

From the pictures I found I was narrowing it down to one of these. I'll check the number of cylinders this evening. Thanks.

 

[ziggys37]

It is a 3 cylinder.