Help needed on 4400 with 72" MMM

   / Help needed on 4400 with 72" MMM #1  

Wayne_H

Gold Member
Joined
Dec 16, 2004
Messages
380
Location
Davidsonville, Maryland
Tractor
John Deere 4400, '48 B and 318
I have a JD 4400 and I recently bought a used 72 inch MMM for it. I have rebuilt the mower, and am trying to install it, but the manual I have is for the 7 Iron mower, not the yellow mower.

If somebody out there has a 72" MMM on a 4400, could you please let me know, I'd like to call you to ask a couple of questions.

1) There are two holes for the draft arms, does it go in the front or rear ones?
2) The plates that mount on the front have two positions, should it be slid towards the front or rear?

Anyway, my email is wayne@flymha.com. I'd appreciate it if anyone can help, I'd like to call you on the phone so I can get this taken care of soon.

Regarding the front brackets... There should have been marks on them from rust or being on the other machine, but I sand blasted them and repainted them....

Thanks

Wayne
 

Tractor & Equipment Auctions

New Idea 4310 10 Wheel V Rake (A49339)
New Idea 4310 10...
2014 UTILITY 53X102 DRY VAN TRAILER (A45678)
2014 UTILITY...
2017 Bobcat E85 Midi Excavator (A46683)
2017 Bobcat E85...
2015 Ford F-150 XLT (A47307)
2015 Ford F-150...
2025 78in Dual Cylinder Hydraulic Grapple Rake Skid Steer Attachment (A46683)
2025 78in Dual...
2006 GMC C8500 Altec AM547 50ft Material Handling Insulated Bucket Truck (A46683)
2006 GMC C8500...
 
Top