Help needed w/skidsteer attachment hoses

   / Help needed w/skidsteer attachment hoses #11  
</font><font color="blue" class="small">( Just got a tracked loader and snowblade and can't get one hose connected. Followed the simple instructions in the manual to relieve residual pressure in the machine lines. The female hose on the machine connects but the male is too hard to push on. It seems that when I first started, it was going on part way but toward the end, it hardly budged. Both connector sides are new. I think these were called flat faced connectors. Do you need to pull back on the knurled collar to assemble it? Any other thoughts?

John )</font>

Had to do the same thing on my alitec auger, had to call service to come out and fix it even when 3 guys tried to fix the problem. He finally disconnected the hoses to the auger itself and then we were able to attach it to the skid steer
 
   / Help needed w/skidsteer attachment hoses #12  
When disconnecting the equipment you should always shut the tractor or power unit off. Then move the control lever in all functions several times. Then disconnect the hoses, you still may wind up with this problem but not normally
 

Tractor & Equipment Auctions

2018 TY-CROP MANUFACTURING LTD DRY BULK PNEUMATIC TRAILER (A53843)
2018 TY-CROP...
2015 CATERPILLAR CT660 TANDEM AXLE DUMP TRUCK (A54313)
2015 CATERPILLAR...
SCAN FOR HAULING AND FINANCING INFORMATION (A52705)
SCAN FOR HAULING...
ALL ITEMS NOT PICKED UP IN 30 DAYS WILL BE RESOLD FOR STORAGE!! (A50775)
ALL ITEMS NOT...
2013 Volvo BL70B (A47477)
2013 Volvo BL70B...
2019 KUBOTA SVL95-2S SKID STEER (A52705)
2019 KUBOTA...
 
Top