Help removing koyker loader.

[TSMART]

Getting rid of loader. Repairs not worth it.
2 things i notice: after removing quick connects to loader and restarting, rpms come up very slowly. Why? Reconnect and everythings fine.
Also when the two QC's are disconnected i lose hydraulics to rear box blade etc. Thought that was a seperate system? Nothing about this in Koyker 160 manual. Thanks.

 

[TSMART]

Jinma 224.

 

[Bob Rooks]

Sounds like your pump is deadheading. Connect your qc's together. I believe this is what people do.

 

[TSMART]

Also lost power steering. Should the quick connects on the tractor side be re connected as there is one male and one female?

 

[mrmikey]

Sounds like your pump is deadheading. Connect your qc's together. I believe this is what people do.

Yup, exactly what's happening, if you're lucky you didn't blow your pump. A lot of people put a pressure relief right on the main pressure line for those times they forget to connect the lines together.

Nothing about this in Koyker 160 manual.

There wouldn't be, it's nothing to do with Koyker it's a tractor specific thing, all Koyker wants is a supply and return line......Mike

 

[TSMART]

Sounds like your pump is deadheading. Connect your qc's together. I believe this is what people do.

I just did and all is working well. Thank you.