Help? TC-45 forward pedal sticking

   / Help? TC-45 forward pedal sticking #1  

Anonymous Poster

Epic Contributor
Joined
Sep 27, 2005
Messages
29,678
I have a new TC-45D (~15 hours on it) and the forward pedal has begun to stick (makes a squeaking sound and doesn't return to neutral when released). I have greased every fitting I can find and sprayed some lithium grease on the roller and cam assembly, without affecting the problem.

Any suggestions?
 
   / Help? TC-45 forward pedal sticking #2  
Yes,

There is a return spring which may be adjusted to pull the pedal back to neutral. Look under the operator platform in the general vacinity where you have been greasing the linkages. It is pretty obvious under there. Tighten it and test it the effect so that you don't have to press the pedal too hard. I had to tighten my TC35D pedal just a bit to remove the problem that you have described. Good luck,

Peter
 
   / Help? TC-45 forward pedal sticking #3  
I know there is only a slim chance of this, but when your pedal sticks, make sure your cruise control switch is turned off. One time I inadvertently turned on cruise and my pedal kept "sticking" until I turned cruise off. /w3tcompact/icons/blush.gif

JimI
 

Tractor & Equipment Auctions

SANY SY75C EXCAVATOR (A51242)
SANY SY75C...
2005 OTTAWA T2 YARD SPOTTER (A51222)
2005 OTTAWA T2...
2016 FORD TRANSIT 250 VAN (A51406)
2016 FORD TRANSIT...
2013 AMSIG S/A Solar Towable Message Board (A50322)
2013 AMSIG S/A...
2014 CATERPILLAR CT660S SBA 6X4 DUMP TRUCK (A51406)
2014 CATERPILLAR...
2017 VOLVO VNM DAY CAB (A51222)
2017 VOLVO VNM DAY...
 
Top