OP
coal160
New member
- Joined
- Aug 31, 2011
- Messages
- 10
- Location
- Odon, Indiana 47562
- Tractor
- Homemade Terremite TBL, Power King 1614
Thanks.
Help with hydraulic Motor Selection
- Thread starter coal160
- Start date
- Views: 6481
J_J
Super Star Member
- Joined
- Sep 6, 2003
- Messages
- 18,973
- Location
- JACKSONVILLE, FL
- Tractor
- Power-Trac 1445, KUBOTA B-9200HST
coal160,
That last pump you posted, only takes about 12 HP to run both pumps to pump a total of 12 GPM. at 1424 psi. .
If you use just one pump as the drive, and a hyd motor, it will take about 6 HP to run the one pump, and HP developed by the hyd motor would be around 5.1 HP
That last pump you posted, only takes about 12 HP to run both pumps to pump a total of 12 GPM. at 1424 psi. .
If you use just one pump as the drive, and a hyd motor, it will take about 6 HP to run the one pump, and HP developed by the hyd motor would be around 5.1 HP
