Hi there from suburban Melbourne (Australia).

[Warpspeed]

I stumbled onto this Forum quite by accident while doing a Google search, and was absolutely fascinated by a thread I found here on building a mini dozer. Unfortunately I live on a small suburban block, and even a small lawn tractor here would crowd me out.

My only experience with tractors and tracked vehicles was in the Antarctic where I was involved with maintaining radio communications on two separate year long expeditions. So I have driven and been around, tractors a little bit, but am by no means any kind of expert.

I have a home workshop with lathe, mill, mig welder and all the usual stuff, and really enjoy a bit of metal fabrication and mechanical engineering in general. So some of what you guys are doing is of absorbing interest .

Cheers,
Tony.

 

[Wagtail]

G'day Cobber and welcome to TBN from Tassie.

Enjoy the site.

 

[LS Tractor Owner]

Welcome to TBN. There a a few threads here that might spark your interest... “ build it yourself “ and “ welding “ just to name a couple... have fun!

 

[shovelmike]

Welcome to TBN, Tony. You are sure to find a lot of good discussions here.

 

[groundcover]

Welcome Tony ! TBN is going to cost you a fortune, first acreage then all the toys to use on it !

 

[Thomas]

:welcome: to TBN...enjoy.

 

[Kyle_in_Tex]

I stumbled onto this Forum quite by accident while doing a Google search, and was absolutely fascinated by a thread I found here on building a mini dozer. Unfortunately I live on a small suburban block, and even a small lawn tractor here would crowd me out.

My only experience with tractors and tracked vehicles was in the Antarctic where I was involved with maintaining radio communications on two separate year long expeditions. So I have driven and been around, tractors a little bit, but am by no means any kind of expert.

I have a home workshop with lathe, mill, mig welder and all the usual stuff, and really enjoy a bit of metal fabrication and mechanical engineering in general. So some of what you guys are doing is of absorbing interest .

Cheers,
Tony.

Welcome Warp Howdy from Texas! Bit of a machinist myself. Many here don't have tractors.

We have many from down under, NZ and Taz here.

I'm guessing you are still having summer heat down there.

 

[Kyle_in_Tex]

G'day Cobber and welcome to TBN from Tassie.

Enjoy the site.

I learned what a "cobber" is today. thanks.... Cobber.

 

[TBN Support]

Hi Tony. Welcome to the forum! :tractor: :welcome:

 

[MF2604h]

Welcome to TBN