Hitch Pins... 1 1/2" x 9"...Source?

[MGH PA]

I need two hitch or clevis pins that measure 1 1/2" x 9" for our log splitter cylinder and I'm having a heck of time locating them. I've tried Northern Tool, Grainger, MSC, McMaster Carr, etc,. and nothing. I would certainly appreciate any leads on a source for pins this size.

Thanks!

 

[busby]

you have a pm

 

[JoeL4330]

have you looked here ? http://www.huyett.com/catalog/download/GL-Huyett-Pins-Catalog.pdf esp. p. 32...is that what you are looking for?

 

[BHD]

1-1/2" x 9" Plain Finish Clevis Pin | Fastenal

+CLEVIS PIN 1-1/2 X 9 PLAIN

Hitch Pins

It would seem like to me one could make some out of some shafting as well,

 

[City Farmer]

I'd make one. I'm sure you can source some 1-1/2" dia. somewhere locally. If you can't, order it online.
You could try here, it looks like it would be about $20 for two + shipping.
Speedy Metals - 1-1/2" {A} Rd Cold Finished 1045

 

[Ehanson]

Caterpillar Dealer?

 

[Renze]

Most agricultural dealerships have dirt cheap hitch pins in stock, here in Holland. Most probably made in india by the thousands, for a price you cant buy the steel and electricity for the lathe, let alone spend your time making some

 

[Baby Grand]

Did you try TSC?
CountyLine® Red Head Hitch Pin, 1-1/4 in. dia. - Tractor Supply Online Store

 

[busby]

McMaster-Carr pricey but they have it

 

[sixdogs]

I'd make one if I couldn't find any at a farm store or a dealer. I'm thinking $15 max. To buy one from a Cat dealer would likely cost $50 or more. When I needed a couple odd size pins I just made them out of round stock and drilled click pin holes in the end. Works fine.