Home Built Forks / Tines

[kc5sii]

I built these from scrap. Total cost is whatever cunsumables. The bucket already had two loops welded to the sides so I took off on that.

 

[beenthere]

Don't see a pic.
Go to "Go Advanced" button and manage pics from there. Browse them to locate them on your computer and upload. They will then be in your post.

 

[crash325]

Good going. :thumbsup:

I've made 3 sets. Mostly from scrap iron

Long Forks about 5'
Short forks about 2'
Real forks, quick on & off 4'

 

[beppington]

I built these from scrap. Total cost is whatever cunsumables. The bucket already had two loops welded to the sides so I took off on that.

If you were trying to make a pooper-scooper, you scooped up the wrong part

 

[looknlearn]

Don't see a pic.
Go to "Go Advanced" button and manage pics from there. Browse them to locate them on your computer and upload. They will then be in your post.

I see the picture in his post.

 

[Wolfy]

Am I looking at a 1510 or a 1710....nice

 

[heitjer]

Great picture - I see it passed the required LOAD TEST!