Home home on the orange

[par4thecourse]

Finally replaced the old Allis Chalmers B with a B7500 & FEL.
It's a great little tractor and orange to boot.
I've found this forum to be a great source of information.

Thanks you all,
par4thecourse

 

[Anonymous Poster]

Congratulations on your new Kubota. And yes, this is a great place to find all kinds of ways to "make further investments" in your tractor! (hee hee) And some very practical ones, too. There was a recent thread elsewhere on the site, for example, about replacing the 3pt adjustment links with the B2710 versions for easier use of the 3pt on the BX-22/2200/1800, B7500 and B2410. Under a hundred bucks and no more futzing around with turnbuckles. Ya gotta like this site!

 

[frank_f15]

welcome to the forum.great place to get info, and a better place to find out how to spend your money, WE LOVE spending other folks $$$$$$./w3tcompact/icons/wink.gif/w3tcompact/icons/grin.gif

 

[Charliebrn]

Could you post a link to that particular thread? I tried searching but couldn't fine it. It sounds interesting....

Thanks!!

 

[AZMike]

Welcome to the post. I've had my B7500 for over two years now, with well over 200 hours on it with no problems. You've picked a good tractor!!

 

[par4thecourse]

charliebrn

I think <A target="_blank" HREF=http://www.tractorbynet.com/cgi-bin/compact/showthreaded.pl?Cat=&Board=owning&Number=176068&page=&view=&sb=&o=&vc=1#Post176068>this</A> will link you to the thread about the 3pt adjustment links.
Looks like a good idea to me.

par4thecourse

 

[RFischer]

Congratulations on your purchase and welcome to the forum. You'll really enjoy it. I've had mine 4 months and I can't say enough about how good a workhorse she is.

Richard

 

[Anonymous Poster]

Regarding the sway link modifications....here's the thread I referred to above.

<A target="_blank" HREF=http://www.tractorbynet.com/cgi-bin/compact/showflat.pl?Cat=&Board=implement&Number=139727&page=&view=&sb=&o=&vc=1>link to it here</A>

 

[Charliebrn]

thank you. I haven't been checking in on the attachments forum like i used to, and it's just what I've been looking for!

 

[Anonymous Poster]

I picked up the parts on Saturday morning when I got back from Orlando. It looks pretty easy to adapt the new links when I have the time this winter...just a little grinding is required, as far as I can see, to allow the channel to mate with the mounts on the arms towards the rear.