Homemade Jaw Crusher.

[David Devuono]

Good thing is, if the cam lobes break, I am into the shaft and lobes for $32

 

[David Devuono]

Working on the case. It will be at least three weeks before I get another chance to work on the Jaw Crusher.

 

[David Devuono]

Getting over the worst cold I ever had. So many projects on the go. I managed to put in about 6 hours of welding this weekend on the Jaw Crusher.

 

[Renze]

You welded the jaw plates with hardfacing, then milled slots inbetween ?

 

[David Devuono]

I milled the slots first, then ran a couple passes with the welder.

 

[David Devuono]

Spent another 10-12 hours on the crusher in the past week or so. Mocking things up to ensure it will come together. Last thing before building a support for the crusher and motor is to build a adjustment mechanism.

 

[jimmyj]

Wow nice job!!

 

[coachgeo]

Spent another 10-12 hours on the crusher in the past week or so. Mocking things up to ensure it will come together. Last thing before building a support for the crusher and motor is to build a adjustment mechanism.

any updates Dave? How'd she turn out?