Honda engine replacement
- Thread starter Fitch4123
- Start date
- Views: 7156
JJT
Veteran Member
- Joined
- Oct 13, 2001
- Messages
- 2,049
- Location
- Upstate NY, USA
- Tractor
- Kubota L3710 HST and a Kubota ZD21 60Pro
Is the Honda rebuildable? That would be my first choice.
My FIL got a free wood splitter with a blown Honda engine, the previous owner never checked or changed the oil. After 5 or 6 years he cooked the Honda motor. The Harbor Freight Predator was a direct swap. I don't know if the OEM Honda was a gx620..... They do call the Predator a fake Honda. The Predator was so cheap my FIL bought 2 so he'd have a spare. 3 years of hard use and he has no complaints.
My FIL got a free wood splitter with a blown Honda engine, the previous owner never checked or changed the oil. After 5 or 6 years he cooked the Honda motor. The Harbor Freight Predator was a direct swap. I don't know if the OEM Honda was a gx620..... They do call the Predator a fake Honda. The Predator was so cheap my FIL bought 2 so he'd have a spare. 3 years of hard use and he has no complaints.
MTGreen
Platinum Member
- Joined
- Oct 12, 2022
- Messages
- 999
- Location
- Montana, USA
- Tractor
- Deere 5220, Ford 1720, Deere Progator 2030
I thought the Predators were Honda clones -I imagine that's an ask google item
I have no clue how many hours are on it but the machine it's in is at least 20 years old. It runs but is weak, lot of blow-by. I know that the hub from the Kohler won't fit the Predator, like you I believe it's a Honda clone
MTGreen
Platinum Member
- Joined
- Oct 12, 2022
- Messages
- 999
- Location
- Montana, USA
- Tractor
- Deere 5220, Ford 1720, Deere Progator 2030
670cc Predator output shaft specs:
Predator base mounting diagram:
Predator output coupling diagram:
Suggest finding the equivalent specs for your Honda and comparing:
Output shaft depends on sub-model per chart here:
Honda dimensional drawings here:
Predator base mounting diagram:
Predator output coupling diagram:
Suggest finding the equivalent specs for your Honda and comparing:
Output shaft depends on sub-model per chart here:
Honda dimensional drawings here:
Last edited:
2manyrocks
Super Member
- Joined
- Jul 28, 2007
- Messages
- 9,272
Terry's Terramites advertises Kohler to predator adapters, but I don't know if they have something that will adapt from a Honda. Terry's Terramites
Sawyer Rob
Super Member
Loose clone, not exact clone, and even though they seem to hold up pretty good, the Hondas do have better materials in them and are better engines.
SR
