Horn on PT

   / Horn on PT #1  

menchhofer

Silver Member
Joined
Feb 7, 2005
Messages
183
Anyone ever put a horn or beverage holder on their PTs yet?
 
   / Horn on PT #2  
I have a beverage holder. I moved the lights up to the ROPS and put a cup holder where the left light was. The cup holder is near the bottom middle of the picture.

BobRip
 
   / Horn on PT #3  
<font color="blue"> I have a beverage holder. I moved the lights up to the ROPS and put a cup holder where the left light was. The cup holder is near the bottom middle of the picture.
</font>

I'd like to see the picture of this as I would really like to have a beverage holder to hold my bottled water mostly what I would put in it)! I have been thinking of adapting somthing from a marine catalog or ATV catalog.
 
   / Horn on PT #4  
I thought I attached a picture. I will try again.

BobRip
 

Attachments

  • 660527-Front View of Cup Holder and Saw holder crp .JPG
    660527-Front View of Cup Holder and Saw holder crp .JPG
    40.7 KB · Views: 216
   / Horn on PT #5  
At first I had my beverage holder where Bob Rip has his , but when I did any brush hogging it would throw stuff on the top of the can. I got a beverage holder like has the peice that fits on the door of the car. I took the holder and slide the part that goes between the window of the car and the door and I slide it under the top of the cover where the grease fitting is in the hose tunnel. It works good and don't get dirt on it while I am working the machine. As for the horn I have a horn like goes on a bicycle, I mounted it on the joy stick. When I got the horn it was kind of a joke, but It is loud and does a good job, it will get someones attention when you blow it. I have an idea that I am going to try for the beverage holder so that it will keep the beverage colder longer.
 
   / Horn on PT #6  
Get BobRip to post a picture that shows the entire pt when it is fully decked out. Some have said that it looks like an urban assault vehicle out of a Mad Max movie.
 
   / Horn on PT #7  
I have a beverage holder... my tummy! /forums/images/graemlins/grin.gif
 
   / Horn on PT #8  
That "some" would be Clint Blake.

Bob Rip
 
   / Horn on PT #9  
I don't think you need a horn. The engine noise is enough to turn heads.
PJ
 
   / Horn on PT #10  
</font><font color="blue" class="small">( I don't think you need a horn. The engine noise is enough to turn heads.
PJ )</font>


<font color="red"> If that doesn't turn them, just fire a few rounds over their heads!!
Evillol.gif


</font>
 

Tractor & Equipment Auctions

2013 Ford F-150 XLT - EcoBoost, Blown Engine, Good Parts Truck (A51039)
2013 Ford F-150...
2012 Chevrolet Equinox 1LT SUV (A50324)
2012 Chevrolet...
2003 MACK RD688S T/A DUMP TRUCK (A51406)
2003 MACK RD688S...
(4) Texas Built 25' Stand Alone Panels (A50515)
(4) Texas Built...
UNUSED AGT QUICK ATTACH AUGER SET (A51244)
UNUSED AGT QUICK...
UNUSED AGT QUICK ATTACH HYD HAMMER (A51244)
UNUSED AGT QUICK...
 
Top