Toplink How do I know which Top link I need??

[Soundguy]

cat 1 -TOPLINK- pin is 3/4" botom links are 7/8

Soundguy

OK, if cat 1 links are 3/4 inches (19 mm), then is my YM 1510D cat 2? I do not think so. However, the link pins that came installed on the tractor are 22mm or 7/8 inches. I know because 1 I measured it and 2) I tried to put a 20 mm bearing on it but it did not fit and the 25 mm was sloppy. I am looking for the a complete 3 ph and having a hard time finding it. I cannot even find the ends so that I could make my own. It is the toplink which is 3/4 in (19 mm), right?

Mike

Found the answer which is as I suspected. Thanks soundguy!!

 

[MJPetersen]

Thanks Soundguy, i found the answer on another thread where you had answered a similar question. That is what I quoted. All the time learning.

Mike