How do I shut it off ;-)

[Gary Sweat]

How about #4 for $1.67. Yanmar Tractor Parts: THROTTLE My YM2002D also has a kill cable that will shut her down no matter what position the throttle is in.

I take it back. I do have one. It's painted green and I always thought it was a big metal washer. Poked it with a screw driver and it feels like a hard rubber washer.

 

[careyo63]

Yanmar Tractors -- Parts -- Sales -- Service
Part # FP-8220 for a 2500/3000 Repl.198220-01261 and it is White nylon feeling. 1.67 which I recieved Reg. mail the next day.

Carey

 

[MJPetersen]

My Friction Plate/Washer desinagrated so I could only use my pedal. Take my advise on this one. If it does wear out Order the correct Nylon one from a parts supplier :ashamed:

Oh no that is what you are supposed to do?:ashamed: I cut up a broken plastic saucer sled and made my friction washer, so I could get back to work--it still is there 1.5 years later. Every once in a while I see a bit of fluorescent green peaking out at me. :thumbsup:

Mike

 

[Smoody]

My Friction Plate/Washer desinagrated so I could only use my pedal. Take my advise on this one. If it does wear out Order the correct Nylon one from a parts supplier :ashamed:

Carey

What does this friction plate look like, I probably have seen it but scratching my head here, curious if mine still has the washer in place..anyone care to take a picture for me?

 

[winston1]

What does this friction plate look like, I probably have seen it but scratching my head here, curious if mine still has the washer in place..anyone care to take a picture for me?

Gary posted a picture of his on post #3. Looking at the Hoye drawing there is evidently a couple of different versions. My 2002d is covered up with the dash sheet metal, can't get a picture of it.

 

[normde2001]

That friction plate just holds the throttle in position, and has nothing to do with shutting off the fuel.

 

[Gary Sweat]

That friction plate just holds the throttle in position, and has nothing to do with shutting off the fuel.

On mine, it was the reason the engine would not shut down when the throttle was closed. Couple of drops of oil and it shut down fine. It can bind a little at the very end and of travel and if there is enough wear in the linkage cause the problem.

 

[clemsonfor]

How about #4 for $1.67. Yanmar Tractor Parts: THROTTLE My YM2002D also has a kill cable that will shut her down no matter what position the throttle is in.

Winston, the bad part about that and Hoye is that they will only ship UPS, so if you cant find anything else you want it will cost you something like $10 to get that $2 part. I have complained on other posts about this and i think Aaron said something about only shipping UPS, but i cant remember.

I wish on small weight orders they would ship US mail. They could throw this o ring or washer or bushing in an envolope and mail it for $0.61 plus say $1 handling and we could pay something like $2 for the shipping.

Ok i will get off the stump.

 

[Smoody]

I wish on small weight orders they would ship US mail. They could throw this o ring or washer or bushing in an envolope and mail it for $0.61 plus say $1 handling and we could pay something like $2 for the shipping.

Then the price of the washer would be $8..:laughing:

 

[winston1]

I had a US mail order get lost from them, they re shipped it UPS, I got the part, installed it and about a week later here came the US mail part. I think that is when they quit using US mail and went to UPS. None of it was Hoye's fault and they were willing to pay shipping back to them for returning the part. They were some inexpensive rubber boots so I just kept them.