how much will 4210 cost

shamban · Jul 2, 2004

I know prices vary by region (and ones negotiating skills), but what can I expect to be quoted for a basic JD4210 with FEL and BH and 72inch mower?

Thanks,

JDgreen227 · Jul 2, 2004

A "basic" 4210 with gear drive and no 4wd should cost about $13,000. Add about $2200 for Ehydro and 4wd, another $1000 for the mid-pto and assorted hydraulics needed to run the FEL and MMM, and backhoe, then tag on about $2500 for the 72 inch deck and about the same for the 420 FEL. And, if you have any $$ left, my salesguy just gave me a quote of $6350 for a 47BH installed on my JD.... /forums/images/graemlins/wink.gif

SteveH_CT · Jul 3, 2004

My 4310 came in around $25,000 - it was configured a little different though - No mower, but I did go for a HD bucket with cutting edge installed, and a couple SCV options. I think the 4210 should be a little less, but not that much /forums/images/graemlins/laugh.gif - Good Luck.

BobJG · Jul 4, 2004

I recently priced out a used 4210 with approx 200 hours on it (from golf course fleet). It had a new dealer installed 420 loader, eHydro, 4wd, No mid PTO and they were asking 17,000 U.S. I checked agdealer and it is gone now.

I also recently purchased a used 4310 with 70 hours, 4wd, eHydro, 430 loader, mid PTO, for $18,800 U.S.

I know your looking for pricing on a new one but thought this would help you out.

I should also note that it took me 3 months of constant searching to find and buy one of these things. Most dealers in Ontario have used 4000 TEN series tractors on the lot for about a week or two and then they are gone. I missed out on three 4310's since April because I couldn't commit.

It doesn't help that I live in Niagara which is full of greenhouses, vineyards, chicken farmers, orchards, and various other places that buy up CUT's like they are going out of style.