How to build a Skid Steer to 3pt adapter?

   / How to build a Skid Steer to 3pt adapter?
  • Thread Starter
#41  
</font><font color="blue" class="small">( I've been trying to think of what else besides the boom pole, pallet mover, and grader blade that I might get someday and want to use on the FEL. So far, I haven't come up with anything. )</font>

Well, I did come up with a reason to get the adapter. It seems like it would come in handy for lifting any 3pt attachment high enough to load it into a pickup or onto a trailer. I know this could be done with chains, but it would be real easy with a FEL and a 3pt adapter.
 
   / How to build a Skid Steer to 3pt adapter? #42  
Excellent point! I'll have to remember that.
 
   / How to build a Skid Steer to 3pt adapter?
  • Thread Starter
#43  
I emailed Bradco asking for the weight of their adapter. They said 210 lbs. I found a place on the web http://www.abcgroff.com/ic/indust.htm that lists the Kasco Switch Hitch SH-400 at 195lbs and the SH-596 at 240lbs.

Spencer, how hard is it to take your Kasco Switch Hitch on and off?
PS: What would you guess the weight of a blank Skid Steer plate is?
 
   / How to build a Skid Steer to 3pt adapter? #44  
</font><font color="blue" class="small">( Spencer, how hard is it to take your Kasco Switch Hitch on and off?
PS: What would you guess the weight of a blank Skid Steer plate is?)</font>

Mosey, I leave the Switch-Hitch on one of my implements at all times. Usually I leave it on my boom pole because that it what I have been using it on the most. It is heavy, if I took it off completely I would not leave it standing up for fear that it would fall over on somebody. So because it is always attached to an implement it is not problem to put on or take off the loader. I would guess that the Bobcat quick-tach plate weighs around 20 pounds, certainly no more than 30 pounds.
 
   / How to build a Skid Steer to 3pt adapter?
  • Thread Starter
#45  
</font><font color="blue" class="small">( Usually I leave it on my boom pole because that it what I have been using it on the most. It is heavy, if I took it off completely I would not leave it standing up for fear that it would fall over on somebody. So because it is always attached to an implement it is not problem to put on or take off the loader.)</font>

I store my boom pole by hanging it up. So, to put it on I pick it up off the hook and then hook it up by holding one end with one hand and guiding the pins into the 3pt arms with the other. It sounds like I would not be doing that with the 200 lb adapter on it!
 

Tractor & Equipment Auctions

POWER BNG2800IE INVERTER GENERATOR (A50854)
POWER BNG2800IE...
2018 FREIGHTLINER M2 26FT NON CDL BOX TRUCK (A51222)
2018 FREIGHTLINER...
Blue Concrete Test Shed (A49461)
Blue Concrete Test...
CATERPILLAR 259D3 SKID STEER (A50458)
CATERPILLAR 259D3...
2018 John Deere 60G Excavator (A50490)
2018 John Deere...
2025 Swict 84in Bucket Skid Steer Attachment (A50322)
2025 Swict 84in...
 
Top