How to change gear oil in BX Bagger?

   / How to change gear oil in BX Bagger? #1  

r0GuE

Veteran Member
Joined
May 9, 2001
Messages
1,332
Location
West PA
Tractor
ex-Bota Owner
Hi guys! I just bought a used bagger for my BX. I got it mounted and leveled (+/- 3/16inch). I have not put on the chute and attached it to the deck yet. I want to change the gearbox oil first.

Anyone have pointers on how the heck to get at them and how to change the oil? My manual tells me nothing about access to the gearboxes.

Thanks for any help you may be able to give me!
 
   / How to change gear oil in BX Bagger? #2  
I asked this same question with no reponse several week ago. I can tell you how to get to the gear boxes and that is to take off the long "L" shaped plate on the back of the bagger. Just start unbolting the bolts and keep going until you've got them all and pull off the plate. I found that I had to loosen the bolts that hold the main gear box on to slide the plate out. From there I couldn't really see how the oil could be changed.
 

Tractor & Equipment Auctions

TANNKO  130BBL VAC TRAILER (A50854)
TANNKO 130BBL VAC...
2015 KENWORTH T800 MID-ROOF SLEEPER (A50854)
2015 KENWORTH T800...
2021 Case IH Magnum 240AFS CVX Connect MFWD Tractor (A50657)
2021 Case IH...
71061 (A49346)
71061 (A49346)
2017 JLG Skytrak 6036 6,000LB 4x4 Rough Terrain Telehandler (A50322)
2017 JLG Skytrak...
3HP Electric Fans (A50854)
3HP Electric Fans...
 
Top