How to locate outlet starting from breaker panel?

   / How to locate outlet starting from breaker panel? #21  
You should know that 2 circuits that share the neutral are required to have the breaker handles tied together. Example: a two pole breaker with a common handle. Having two separate breakers apart from each other where the handles can't be tied together is a code violation.

Wish the people that wired my house in Rapid City knew that. I had a circuit where each the top and bottom outlet in each duplex receptacle was on a separate circuit. I needed to do some work on one outlet and got bit because it never occurred to me that someone would wire that way. I guess they got a good deal on some 12/3 wire.

Doug in SW IA
 
   / How to locate outlet starting from breaker panel? #22  
Wish the people that wired my house in Rapid City knew that. I had a circuit where each the top and bottom outlet in each duplex receptacle was on a separate circuit. I needed to do some work on one outlet and got bit because it never occurred to me that someone would wire that way. I guess they got a good deal on some 12/3 wire.

Doug in SW IA

That can be done even without 12-3 or a mwbc.

That's why you test BOTH sides of a duplex recep. before you work it. And even if you didn't, the connector tab that ties the terminals together being missing should be clue #1
 
   / How to locate outlet starting from breaker panel? #23  
Wish the people that wired my house in Rapid City knew that. I had a circuit where each the top and bottom outlet in each duplex receptacle was on a separate circuit. I needed to do some work on one outlet and got bit because it never occurred to me that someone would wire that way. I guess they got a good deal on some 12/3 wire.

Doug in SW IA

That's typical for living room wiring, you'll probably find that a light switch controls one side. Used for lamps and lighting.
 
   / How to locate outlet starting from breaker panel? #24  
That's typical for living room wiring, you'll probably find that a light switch controls one side. Used for lamps and lighting.
In this case they were not controlled by a switch, both sides were hot all the time. Test both sides, connector tab, hindsight is 20/20.

Doug in SW IA
 

Tractor & Equipment Auctions

2022 Polaris Ranger 4x4 Utility Cart (A54811)
2022 Polaris...
2014 Jeep Cherokee Latitude SUV (A53424)
2014 Jeep Cherokee...
2020 CATERPILLAR 259D3 SKID STEER (A52705)
2020 CATERPILLAR...
2000 FORD F-350 SUPER DUTY BUCKET TRUCK (A52472)
2000 FORD F-350...
KUBOTA M7-152 TRACTOR (A54756)
KUBOTA M7-152...
2016 FORD EXPLORER (A51406)
2016 FORD EXPLORER...
 
Top