Hello, I have a NH 1720 and need to power a 757C backhoe. I do not have remote hydraulics and read in another thread ________________________________________________________________________________________________
" Re: NH Or Case 757C Backhoe Owners
Quote:
Originally Posted by Caliche
Rick,
Spencer said above
" They said I could convert my steel high-pressure return line from my loader valve to a flexible hose with a quick-disconnect and then when I wanted to use the backhoe I would disconnect that flexible line and use it for the backhoe, making my loader inoperable. He said I wouldn't be using the loader and the backhoe at the same time anyway.
"
I was responding to that.
OK. But the guy that gave that advise didn't know what he was talking about. A proper installation of that nature removes the steel line leading FROM the loader control valve, not TO it. loader function is not interrupted when this installation is properly done."
__________________________________________________________________________________________________
Can anyone clarify this for me and does this work? I am looking for the easiest, cheapest way to power this BH. (I do not have a remote hydraulic setup). Any advice would be appreciated, thanks.
" Re: NH Or Case 757C Backhoe Owners
Quote:
Originally Posted by Caliche
Rick,
Spencer said above
" They said I could convert my steel high-pressure return line from my loader valve to a flexible hose with a quick-disconnect and then when I wanted to use the backhoe I would disconnect that flexible line and use it for the backhoe, making my loader inoperable. He said I wouldn't be using the loader and the backhoe at the same time anyway.
"
I was responding to that.
OK. But the guy that gave that advise didn't know what he was talking about. A proper installation of that nature removes the steel line leading FROM the loader control valve, not TO it. loader function is not interrupted when this installation is properly done."
__________________________________________________________________________________________________
Can anyone clarify this for me and does this work? I am looking for the easiest, cheapest way to power this BH. (I do not have a remote hydraulic setup). Any advice would be appreciated, thanks.
