How to pull gas tank on "48 A?
- Thread starter BarryinMN
- Start date
- Views: 1044
RobertN
Super Member
Re: How to pull gas tank on \"48 A?
Have not had to do mine. Seems that once the hood is out of the way, there is only a few bolts holding it on, and of course the gas line. Do you have a battery box or hydraulics that might block things?
Mine is a'41 A.
Have not had to do mine. Seems that once the hood is out of the way, there is only a few bolts holding it on, and of course the gas line. Do you have a battery box or hydraulics that might block things?
Mine is a'41 A.
RobertN
Super Member
Re: How to pull gas tank on \"48 A?
I'll look clsoer at mine tomorrow. You might also cross post to ytmag.com on the Farmall discussion board.
I'll look clsoer at mine tomorrow. You might also cross post to ytmag.com on the Farmall discussion board.
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
Re: How to pull gas tank on \"48 A?
I think he's got a JD 'A'.. not a farmall 'A'
Powertroll is a JD version of a precursor to the standard 3pt hitch we have today... etc...\
To the fellow with the 'A'.. I have a 'B'.. looks like it would come out as follows:
As for removing it.. once sheet metal is gone, and bands / bolts are loose / gas line gone.. should be piece of cake.
Might try a tank sealer.. like por15.. or even an epoxy rated for gas tank repair ( they have both gas tank repair sticks, and battery repair stickes..etc.. ).. try it.. you might get lucky.
Soundguy
I think he's got a JD 'A'.. not a farmall 'A'
Powertroll is a JD version of a precursor to the standard 3pt hitch we have today... etc...\
To the fellow with the 'A'.. I have a 'B'.. looks like it would come out as follows:
As for removing it.. once sheet metal is gone, and bands / bolts are loose / gas line gone.. should be piece of cake.
Might try a tank sealer.. like por15.. or even an epoxy rated for gas tank repair ( they have both gas tank repair sticks, and battery repair stickes..etc.. ).. try it.. you might get lucky.
Soundguy
Re: How to pull gas tank on \"48 A?
I used to have a JD M and the tank leaked. After finding out a new tank was $60, I took it to a machine shop where the guy cut out the leaky tube in the bottom and welded in a new one. Cost was $10!
Worked great for me and the new owner years later.
Best Wishes,
Ron
I used to have a JD M and the tank leaked. After finding out a new tank was $60, I took it to a machine shop where the guy cut out the leaky tube in the bottom and welded in a new one. Cost was $10!
Worked great for me and the new owner years later.
Best Wishes,
Ron
