SGTractor
New member
- Joined
- Aug 12, 2012
- Messages
- 8
- Location
- BRESILLEY (FRANCE)
- Tractor
- LS RIO36 HST + David Brown 880 Selectmatic
Hi again,
The tractor is doing rather fine (or rather was....) I did the 50 hours service yesterday, the French importer (honestly a douchbag...) for LS specifies that the transmission oil must be changed as well as the filters, seemed like a waste but I went along with it, I used the old oil for a very old David Brown 880 Selectmatic tractor that had been running "mayonnaise" in its internals :laughing:.
I do have a issue I was hopping the oil change would solve nut it hasn't
, the bloody HST pedal has started being lazy (1 to 2 second lag) when coming back to the center position, it started around 45 hours and hasn't improved a bit with the maintenance.
It only does this when running the engine with a range selected (ie moving) if I play with the pedals in neutral it works just fine....
Now I'm going to try to see if I can fix it by cleaning and lubricating the linkage (the V notch thing included) but in case this isn't the solution has anybody else ever had the issue ?
Cheers from europe
The tractor is doing rather fine (or rather was....) I did the 50 hours service yesterday, the French importer (honestly a douchbag...) for LS specifies that the transmission oil must be changed as well as the filters, seemed like a waste but I went along with it, I used the old oil for a very old David Brown 880 Selectmatic tractor that had been running "mayonnaise" in its internals :laughing:.
I do have a issue I was hopping the oil change would solve nut it hasn't
, the bloody HST pedal has started being lazy (1 to 2 second lag) when coming back to the center position, it started around 45 hours and hasn't improved a bit with the maintenance. It only does this when running the engine with a range selected (ie moving) if I play with the pedals in neutral it works just fine....
Now I'm going to try to see if I can fix it by cleaning and lubricating the linkage (the V notch thing included) but in case this isn't the solution has anybody else ever had the issue ?
Cheers from europe