Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
It does look like a TSC cyl to me.
I would thread the rod into the yoke as far as i could.
I wouldn't hesitate to put those soft cast (cr@p) metal spacers on my hard metal rod.. the spacers are likely to wear before the threads do.
On my jd 1517 batwing, there is about 1/2" of threads after my yokes showing.. I set a spacer on em.. mower is a 98 and has seen heavy mowing in its lifetime.. threads look new.. spacers are wore out!
Soundguy
I would thread the rod into the yoke as far as i could.
I wouldn't hesitate to put those soft cast (cr@p) metal spacers on my hard metal rod.. the spacers are likely to wear before the threads do.
On my jd 1517 batwing, there is about 1/2" of threads after my yokes showing.. I set a spacer on em.. mower is a 98 and has seen heavy mowing in its lifetime.. threads look new.. spacers are wore out!
Soundguy
