Loader Hydraulic 3rd function valve

[lockman4288]

I have a l3240 that has a set of rear remotes for the backhoe is there any way to plum a hose to the front for a snow plow on the loader with a control in the cab or is it cheaper and easier to buy the third function kit

 

[KennyV]

You can run hoses Under the tractor and to the front... Works well.

 

[kennyd]

Long 1/4" hoses and zip ties are the cheapest solution, might want to add a set of QDs where the loader comes off for convenience but its not necessary.

 

[murphy1244]

Do you have a control lever for the Remote?

 

[lockman4288]

No could i put one in the cab

 

[kennyd]

No could i put one in the cab

Then what you have is a Power Beyond loop, not a remote. You might think about a solenoid valve and run wires into the cab rather than hoses.

 

[J_J]

Wait a minute.

Do you have a remote valve, and if so, you have a lever or cables.

If you have a loader, you could add a selector/diverter valve and use the joystick control to move the snow plow.

Here is the diverter valve.

Surplus Center - 12 VDC 13.2 GPM SAE 8 DOUBLE SELECTOR VALVE

Here is your 3rd function if you have to add one.

Surplus Center - 12 VDC 10 GPM OC DA SOLENOID VALVE

Subplate that goes with the 3rd function.